Traxxas Stampede 4X4 Hold Down Battery Clip

This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite building
Enables installation of taller multi-cell batteries

CONSISTS OF:
Battery Hold Down with metal Post and Body Clip

REQUIRES:
Fastening to chassis

REMARKS:
For stock battery holder, order TRAC6730.

This item compliments the main item right here.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/10 scale car applications
Prewired with Traxxas high current port

CONSISTS OF:
11.1V 5000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Port

REQUIRES:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Ranked Capability: 5000mAh
Discharge Score: 25C constant
Measurements: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Port: ElectriFly
Watt Hours: 56Wh

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER disassemble or modify pack electrical wiring in any way or puncture cells
NEVER put on combustible materials or leave unattended during
    charging
ALWAYS Charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY stay out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm