Traxxas Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Vehicle, TRAD42**.

FUNCTIONS:
Formed plastic construction
1.0 metric pitch

INCLUDES:
50T Spur Gear for the Traxxas XO-1 On-Road Vehicle

This is a great enhancement to the item currently being gone over.

Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FUNCTIONS:
Hardened steel construction
Fits 0.196" (5mm) size motor shafts
Number of teeth and pitch marked on gear for easy recognition

INCLUDES:
18T Pinion Gear with Set Screw

SPECS:
Number of Teeth: 18
Pitch: 1.0 metric
Pressure Angle: 20°

Often purchased with the item that you are currently reviewing.

Shock Shafts, Gtx, 110Mm (Assembled With Rod Ends & Hollow Balls

These are the Shock Shafts for the GTX Shocks
utilized on the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Steel construction with composite plastic rod ends and pressed-in
    ball links

INCLUDES:
Two each; Shock Shafts with Rod Ends and Ball Hyperlinks

This is a great enhancement to the item currently being gone over.



This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
Two electric fans lower motor temperatures as much as 30 degrees
Formed plastic shroud, black in color
One year limited guarantee through Castle Creations beginning at date
    of purchase

INCLUDES:
Two Fans, Shroud, two Zip Ties and Wire Lead

SPECS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

Many others have actually purchased this item together with the item that you are currently reviewing.

Bumper Mount, Front/ Bumper Support, X-Maxx

This is the Bumper Mount and Front Bumper Assistance
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic construction

INCLUDES:
One each; Bumper Mount and Front Bumper Assistance

You will certainly love this item if you have the item earlier stated.

Rebuild Kit, Steel Constant-Velocity Driveshaft (Includes Pins F

This is the Rebuild Set for the Consistent Velocity Driveshafts
    utilized on the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Steel construction
Changes the pins and inserts that connects the #7750 continuous
    velocity driveshaft to the #7753 stub axle

INCLUDES:
Two each, Pins and Inserts

You will certainly love this item if you have the item earlier stated.



This is the Dual Cooling Fan Y-Harness from Novak.

FEATURES:
Enables two cooling fans equipped with JST plugs to be set up onto
    Novak ESCs for higher cooling ability

INCLUDES:
Dual Cooling Fan Y-Harness from Novak

SPECS:
Overall Length: 3.6" (91mm) not consisting of adapters

This item compliments the above gone over item.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronics
    and prolong life of motor or ESC
Thirty day limited guarantee beginning at date of purchase-valid
    in the United States just

INCLUDES:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Connector

SPECS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)

Want another terrific item to match the above discussed item?

Body, Fits X-Maxx (Clear, Trimmed, Requires Painting) W/ Window

This is the optional Clear Body for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Formed from clear polycarbonate plastic
Enables X-Maxx drivers to create their own custom paint schemes

INCLUDES:
Clear Body
Body Trim Decal Sheet and Window Masks

NEEDS:
Polycarbonate safe spray or brush-on paint

SPECS:
Length: 27.7" (705mm)
Width: 9.2" (234mm) behind front wheels, narrowest point
11" (279mm) at rear wheels, largest point
Height: 7.1" (180.3mm)