Traxxas Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Vehicle, TRAD42**.

FEATURES:
Formed plastic building and construction
1.0 metric pitch

INCLUDES:
50T Spur Gear for the Traxxas XO-1 On-Road Vehicle

This is a superb enhancement to the item presently being talked about.

Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FEATURES:
Solidified steel building and construction
Fits 0.196" (5mm) size motor shafts
Variety of teeth and pitch stamped on gear for easy recognition

INCLUDES:
18T Pinion Gear with Set Screw

SPECS:
Variety of Pearly whites: 18
Pitch: 1.0 metric
Pressure Angle: 20°

Frequently gotten with the item that you are presently reviewing.

Shock Shafts, Gtx, 110Mm (Assembled With Rod Ends & Hollow Balls

These are the Shock Shafts for the GTX Shocks
used on the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Steel building and construction with composite plastic rod ends and pressed-in
    ball links

INCLUDES:
Two each; Shock Shafts with Rod Ends and Ball Hyperlinks

This is a superb enhancement to the item presently being talked about.



This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
Two electrical fans lower motor temperatures as much as 30 degrees
Formed plastic shroud, black in color
One year restricted warranty through Castle Creations beginning at date
    of purchase

INCLUDES:
Two Fans, Shroud, two Zip Ties and Wire Lead

SPECS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

Several others have gotten this item together with the item that you are presently reviewing.

Bumper Mount, Front/ Bumper Support, X-Maxx

This is the Bumper Mount and Front Bumper Support
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Molded composite plastic building and construction

INCLUDES:
One each; Bumper Mount and Front Bumper Support

You will certainly like this thing if you have the thing earlier mentioned.

Rebuild Kit, Steel Constant-Velocity Driveshaft (Includes Pins F

This is the Rebuild Kit for the Continuous Velocity Driveshafts
    used on the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Steel building and construction
Replaces the pins and inserts that connects the #7750 continuous
    speed driveshaft to the #7753 stub axle

INCLUDES:
Two each, Pins and Inserts

You will certainly like this thing if you have the thing earlier mentioned.



This is the Dual Cooling Fan Y-Harness from Novak.

FEATURES:
Allows two cooling fans geared up with JST plugs to be set up onto
    Novak ESCs for higher cooling ability

INCLUDES:
Dual Cooling Fan Y-Harness from Novak

SPECS:
Overall Length: 3.6" (91mm) not consisting of ports

This item praises the above talked about item.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronic devices
    and lengthen life of motor or ESC
Thirty day restricted warranty beginning at date of purchase-valid
    in the United States only

INCLUDES:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Port

SPECS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)

Want an additional wonderful item to match the above pointed out item?

Body, Fits X-Maxx (Clear, Trimmed, Requires Painting) W/ Window

This is the optional Clear Body for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Formed from clear polycarbonate plastic
Allows X-Maxx motorists to develop their own customized paint plans

INCLUDES:
Clear Body
Body Trim Decal Sheet and Window Masks

NEEDS:
Polycarbonate safe spray or brush-on paint

SPECS:
Length: 27.7" (705mm)
Width: 9.2" (234mm) behind front wheels, narrowest point
11" (279mm) at rear wheels, largest point
Height: 7.1" (180.3mm)