Traxxas Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Automobile, TRAD42**.

FEATURES:
Formed plastic construction
1.0 metric pitch

CONSISTS OF:
50T Spur Gear for the Traxxas XO-1 On-Road Automobile

This is a great enhancement to the product currently being discussed.

Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FEATURES:
Solidified steel construction
Fits 0.196" (5mm) diameter motor shafts
Variety of teeth and pitch marked on gear for easy recognition

CONSISTS OF:
18T Pinion Gear with Set Screw

SPECS:
Variety of Pearly whites: 18
Pitch: 1.0 metric
Pressure Angle: 20°

Often bought with the product that you are currently checking out.

Shock Shafts, Gtx, 110Mm (Assembled With Rod Ends & Hollow Balls

These are the Shock Shafts for the GTX Shocks
used on the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Steel construction with composite plastic rod ends and pressed-in
    ball links

CONSISTS OF:
Two each; Shock Shafts with Rod Ends and Ball Hyperlinks

This is a great enhancement to the product currently being discussed.



This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
Two electric fans lower motor temperature levels as much as 30 degrees
Formed plastic shroud, black in color
One year limited guarantee through Castle Creations beginning at date
    of purchase

CONSISTS OF:
Two Fans, Shroud, 2 Zip Ties and Wire Lead

SPECS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

Lots of others have bought this product together with the product that you are currently checking out.

Bumper Mount, Front/ Bumper Support, X-Maxx

This is the Bumper Mount and Front Bumper Assistance
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Molded composite plastic construction

CONSISTS OF:
One each; Bumper Mount and Front Bumper Assistance

You will enjoy this item if you have the item previously pointed out.

Rebuild Kit, Steel Constant-Velocity Driveshaft (Includes Pins F

This is the Rebuild Set for the Constant Velocity Driveshafts
    used on the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Steel construction
Replaces the pins and inserts that connects the #7750 consistent
    speed driveshaft to the #7753 stub axle

CONSISTS OF:
Two each, Pins and Inserts

You will enjoy this item if you have the item previously pointed out.



This is the Dual Cooling Fan Y-Harness from Novak.

FEATURES:
Enables 2 cooling fans geared up with JST plugs to be installed onto
    Novak ESCs for higher cooling ability

CONSISTS OF:
Dual Cooling Fan Y-Harness from Novak

SPECS:
Overall Length: 3.6" (91mm) not including ports

This product compliments the above discussed product.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronic devices
    and extend life of motor or ESC
Thirty day limited guarantee beginning at date of purchase-valid
    in the United States just

CONSISTS OF:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Adapter

SPECS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)

Want another great product to match the above stated product?

Body, Fits X-Maxx (Clear, Trimmed, Requires Painting) W/ Window

This is the optional Clear Body for the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Formed from clear polycarbonate plastic
Enables X-Maxx motorists to produce their own custom-made paint schemes

CONSISTS OF:
Clear Body
Body Trim Decal Sheet and Window Masks

REQUIRES:
Polycarbonate safe spray or brush-on paint

SPECS:
Length: 27.7" (705mm)
Width: 9.2" (234mm) behind front wheels, narrowest point
11" (279mm) at rear wheels, best point
Height: 7.1" (180.3mm)