Traxxas Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur equipment

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Several others have actually gotten this thing in addition to the thing that you are presently checking out.

Spur Gear (83T) 48P

This is a 48P, 83T Stimulate Equipment for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Developed for designs with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur equipment

SPECS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    86T equipment (TRAC4686) and 90T equipment (TRAC4690).

Want an additional terrific thing to enhance the above stated thing?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FUNCTIONS:
Pinion equipment with set screw, Silver in color

CONSISTS OF:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

NEEDS:
Setup

SPECS:
Outer Size: 14mm (9/16")
Inner Size: 11mm (7/16")

This thing is often gotten with the above stated thing.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Equipment for designs
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Developed for designs with a slipper clutch
Black plastic building

CONSISTS OF:
One spur equipment

SPECS:
Pitch: 48
Tooth: 90

REMARKS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 86T equipment (TRAC4686).

The below thing likewise sets actually well with the thing being gone over.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

REMARKS:
This part will fit both the requirement and XL version of the Rustler
or Stampede.

This thing praises the above gone over thing.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building

CONSISTS OF:
One Steel Disc
3 Friction Pads
2 Springs
One 4mm Lock Nut
One 5mm Lock Nut
Directions

NEEDS:
Disassembly of slipper clutch

This is a wonderful addition to the thing presently being gone over.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Center
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Pot Metal Construction
Silver in Color

CONSISTS OF:
One Slipper Press Plate
One Slipper Press Plate Center

NEEDS:
Assembly onto Automobile

Here is a terrific thing that several others have actually purchased the very same time.

Pinion Gear 48P 25T

This equipment is a steel pinion equipment in 48 pitch

Features: Brass pinion equipment

Includes: 1 equipment and 1 set screw

Specs: Steel, 48 pitch, 25 tooth pinion equipment.
    Shaft length- 3/16" Equipment length- 1/4" General length- 7/16"
    Shaft diameter- 1/4" Equipment diameter- 1/2"
    Installing shaft (motor shaft) 1/8"