Traxxas Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for models with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Many others have purchased this item in addition to the item that you are presently reviewing.

Spur Gear (83T) 48P

This is a 48P, 83T Stimulate Equipment for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Created for models with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).

Want one more terrific item to match the above pointed out item?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FUNCTIONS:
Pinion gear with set screw, Silver in color

CONSISTS OF:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

REQUIRES:
Setup

SPECIFICATIONS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")

This item is frequently purchased with the above pointed out item.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Equipment for models
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Created for models with a slipper clutch
Black plastic building

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 90

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).

The below item also pairs truly well with the item being gone over.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

REMARKS:
This part will fit both the standard and XL version of the Rustler
or Stampede.

This item praises the above gone over item.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Set for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building

CONSISTS OF:
One Steel Disc
3 Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Guidelines

REQUIRES:
Disassembly of slipper clutch

This is a wonderful addition to the item presently being gone over.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Hub
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Pot Metal Construction
Silver in Color

CONSISTS OF:
One Slipper Press Plate
One Slipper Press Plate Hub

REQUIRES:
Assembly onto Vehicle

Here is a terrific item that lots of others have purchased the same time.

Pinion Gear 48P 25T

This gear is a steel pinion gear in 48 pitch

Functions: Brass pinion gear

Includes: 1 gear and 1 set screw

Specs: Steel, 48 pitch, 25 tooth pinion gear.
    Shaft length- 3/16" Equipment length- 1/4" Total length- 7/16"
    Shaft size- 1/4" Equipment size- 1/2"
    Installing shaft (motor shaft) 1/8"