Traxxas Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Lots of others have gotten this item together with the item that you are presently reviewing.

Spur Gear (83T) 48P

This is a 48P, 83T Stimulate Gear for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).

Want one more great item to match the above discussed item?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas

FUNCTIONS:
Pinion gear with set screw, Silver in color

INCLUDES:
(1) 23 Tooth 48 Pitch Pinion Gear
(1) One 4mmx2mm set screw

REQUIRES:
Installation

SPECS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")

This item is regularly gotten with the above discussed item.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Gear for designs
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Developed for designs with a slipper clutch
Black plastic building and construction

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 90

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).

The below item likewise pairs truly well with the item being gone over.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building and construction
_
Roll pin pre-installed

INCLUDES:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

REMARKS:
This part will fit both the requirement and XL variation of the Rustler
or Stampede.

This item compliments the above gone over item.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Set for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
One Steel Disc
3 Friction Pads
2 Springs
One 4mm Lock Nut
One 5mm Lock Nut
Guidelines

REQUIRES:
Disassembly of slipper clutch

This is a great enhancement to the item presently being gone over.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Center
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Pot Metal Building and construction
Silver in Color

INCLUDES:
One Slipper Press Plate
One Slipper Press Plate Center

REQUIRES:
Assembly onto Automobile

Here is a great item that lots of others have bought at the very same time.

Pinion Gear 48P 25T

This gear is a steel pinion gear in 48 pitch

Features: Brass pinion gear

Includes: 1 gear and 1 set screw

Specifications: Steel, 48 pitch, 25 tooth pinion gear.
    Shaft length- 3/16" Gear length- 1/4" General length- 7/16"
    Shaft size- 1/4" Gear size- 1/2"
    Mounting shaft (motor shaft) 1/8"