Traxxas Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for models with a slipper clutch.
Black plastic building

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is likewise a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Several others have bought this product in addition to the product that you are currently checking out.

Spur Gear (83T) 48P

This is a 48P, 83T Spur Equipment for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Designed for models with a slipper clutch.
Black plastic building

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 83

COMMENTS:
For this slipper clutch design there is likewise a 76T equipment (TRAC4676),
    86T equipment (TRAC4686) and 90T equipment (TRAC4690).

Want another fantastic product to match the above stated product?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FEATURES:
Pinion equipment with set screw, Silver in color

INCLUDES:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

REQUIRES:
Installation

SPECIFICATIONS:
Outer Size: 14mm (9/16")
Inner Size: 11mm (7/16")

This product is frequently bought with the above stated product.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Equipment for models
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Designed for models with a slipper clutch
Black plastic building

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 90

COMMENTS:
For this slipper clutch design there is likewise a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 86T equipment (TRAC4686).

The below product additionally sets truly well with the product being discussed.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building
_
Roll pin pre-installed

INCLUDES:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

COMMENTS:
This part will fit both the requirement and XL version of the Rustler
or Stampede.

This product praises the above discussed product.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building

INCLUDES:
One Steel Disc
3 Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Directions

REQUIRES:
Disassembly of slipper clutch

This is a wonderful addition to the product currently being discussed.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Center
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Pot Metal Building
Silver in Color

INCLUDES:
One Slipper Press Plate
One Slipper Press Plate Center

REQUIRES:
Assembly onto Car

Below is a fantastic product that many others have purchased the very same time.

Pinion Gear 48P 25T

This equipment is a steel pinion equipment in 48 pitch

Functions: Brass pinion equipment

Consists of: 1 equipment and 1 set screw

Specifications: Steel, 48 pitch, 25 tooth pinion equipment.
    Shaft length- 3/16" Equipment length- 1/4" General length- 7/16"
    Shaft size- 1/4" Equipment size- 1/2"
    Installing shaft (motor shaft) 1/8"