Traxxas Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur equipment

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Lots of others have acquired this item in addition to the item that you are presently reading about.

Spur Gear (83T) 48P

This is a 48P, 83T Spur Equipment for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur equipment

SPECS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is likewise a 76T equipment (TRAC4676),
    86T equipment (TRAC4686) and 90T equipment (TRAC4690).

Want an additional great item to compliment the above discussed item?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FUNCTIONS:
Pinion equipment with set screw, Silver in color

CONSISTS OF:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

NEEDS:
Installation

SPECS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")

This item is regularly acquired with the above discussed item.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Equipment for designs
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Developed for designs with a slipper clutch
Black plastic building and construction

CONSISTS OF:
One spur equipment

SPECS:
Pitch: 48
Tooth: 90

REMARKS:
For this slipper clutch design there is likewise a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 86T equipment (TRAC4686).

The below item additionally pairs truly well with the item being gone over.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building and construction
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

REMARKS:
This part will fit both the requirement and XL variation of the Rustler
or Stampede.

This item compliments the above gone over item.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Steel Disc
3 Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Instructions

NEEDS:
Disassembly of slipper clutch

This is a wonderful enhancement to the item presently being gone over.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Center
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Pot Metal Construction
Silver in Color

CONSISTS OF:
One Slipper Press Plate
One Slipper Press Plate Center

NEEDS:
Assembly onto Automobile

Below is a great item that several others have purchased the same time.

Pinion Gear 48P 25T

This equipment is a steel pinion equipment in 48 pitch

Features: Brass pinion equipment

Consists of: 1 equipment and 1 set screw

Specifications: Steel, 48 pitch, 25 tooth pinion equipment.
    Shaft length- 3/16" Equipment length- 1/4" General length- 7/16"
    Shaft size- 1/4" Equipment size- 1/2"
    Mounting shaft (motor shaft) 1/8"