Traxxas Spur Gear (76T) 48P

This is a 48P, 76T Spur Equipment for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Designed for designs with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 76

COMMENTS:
For this slipper clutch design there is likewise a 86T equipment (TRAC4686),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

This is a great enhancement to the thing presently being talked about.

Spur Gear (83T) 48P

This is a 48P, 83T Spur Equipment for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Designed for designs with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 83

COMMENTS:
For this slipper clutch design there is likewise a 76T equipment (TRAC4676),
    86T equipment (TRAC4686) and 90T equipment (TRAC4690).

Get this thing to improve the one you are reading about.

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Equipment with Set Screw
from Traxxas.

FEATURES:
Steel building and construction, silver in color

INCLUDES:
One 31 Tooth, 48 Pitch Pinion Equipment
One 3x4mm Set Screw (1.5mm hex size)

NEEDS:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Diameter: 1/8"
Outside Diameter: .69" (17.5mm)

Lots of others have actually gotten this thing together with the thing that you are presently checking out.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building and construction
_
Roll pin pre-installed

INCLUDES:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Diameter: .21" ( 5mm)

COMMENTS:
This part will fit both the standard and XL version of the Rustler
or Stampede.

Right here is one more thing that compliments the thing being talked about.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Set for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
One Steel Disc
Three Friction Pads
2 Springs
One 4mm Lock Nut
One 5mm Lock Nut
Instructions

NEEDS:
Disassembly of slipper clutch

Get this thing to improve the one you are reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Want one more wonderful thing to match the above pointed out thing?

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Diameter: 3mm

COMMENTS:
These might likewise be described as coverplate screws.

This thing is often gotten with the above pointed out thing.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Hub
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Pot Metal Construction
Silver in Color

INCLUDES:
One Slipper Press Plate
One Slipper Press Plate Hub

NEEDS:
Assembly onto Automobile

This thing compliments the above talked about thing.

Traxxas Female Connector Set (2)

These are the Female Traxxas Connectors Plugs Only (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide area, gold-plated terminals
Reverse polarity security makes it impossible to link in reverse
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Protect, positive locking spring loaded terminals for constant
    contact
Several locking barbs keep terminals secure

INCLUDES:
2 black female plastic connectors
2 sets of gold metal pins
Direction sheet

NEEDS:
Soldering wires to the metal pins