Traxxas Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Equipment
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur equipment

NEEDS:
Installation on the car

SPECS:
Size: 2.16" (55mm)
Thickness: .23" (6mm)

The below product additionally pairs actually well with the product being talked about.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These belong to the slipper assembly.

FEATURES:
Aluminum building

INCLUDES:
One slipper pressure plate
One slipper hub

NEEDS:
Installation onto car.

Below is a excellent product that numerous others have purchased the same time.

Rebuild Kit Hd Slipper Clutch

This is the Strong Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Parts for both nitro and electrical Revo and Maxx trucks

INCLUDES:
Three Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Recommendations

NEEDS:
Disassembly of slipper clutch

Below is another product that compliments the product being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This product compliments the above talked about product.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal building

INCLUDES:
Two various plasting holders
One disk-shaped magnet
Three 8mm screws
Three 10mm screws

SPECS:
Magnet diameter: 5mm
Magnet density: 2mm

You will enjoy this product if you have the product just above stated.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
6 black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

REMARKS:
These might also be described as coverplate screws.

Below is a excellent product that numerous others have purchased the same time.

56T 0.8 P Spur Gear

This is the 56 Tooth Spur Equipment
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building
Black in color
.8 metric pitch

INCLUDES:
One 56T 0.8 Pitch Spur Equipment

NEEDS:
Assembly onto car

This product compliments the main item here.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Equipment
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

INCLUDES:
One 58T 0.8 Pitch Spur Equipment

NEEDS:
Assembly onto car

Get this product to enhance the one you are reading about.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Equipment
for the Traxxas E-Maxx.

FEATURES:
Nylon building, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur equipment

NEEDS:
Installation on the car

SPECS:
Size: 2.12" (54mm)
Thickness: .23" (6mm)

Below is another product that compliments the product being talked about.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel hubs fit on the end of the stub axles.

FEATURES:
Changes missing out on or harmed hex wheel hubs
Hubs are made of molded black plastic
Axle pins are steel

INCLUDES:
Two Hex Wheel Hubs
Two 2.5x12mm axle pins

NEEDS:
Placing pins through stub axles (4953) and positioning wheel hubs in
    recessed area of axle providers (4932).