Traxxas Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Equipment
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

CONSISTS OF:
One 68T 0.8 metric pitch spur equipment

REQUIRES:
Installation on the car

SPECS:
Diameter: 2.16" (55mm)
Density: .23" (6mm)

The listed below product additionally pairs truly well with the product being discussed.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These belong to the slipper assembly.

FEATURES:
Aluminum building and construction

CONSISTS OF:
One slipper pressure plate
One slipper hub

REQUIRES:
Installation onto car.

Here is a fantastic product that lots of others have actually bought at the exact same time.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Parts for both nitro and electric Revo and Maxx trucks

CONSISTS OF:
3 Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

Here is one more product that compliments the product being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This product compliments the above discussed product.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FUNCTIONS:
Black plastic and metal building and construction

CONSISTS OF:
2 various plasting holders
One disk-shaped magnet
3 8mm screws
3 10mm screws

SPECS:
Magnet diameter: 5mm
Magnet thickness: 2mm

You will enjoy this product if you have the product above pointed out.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Diameter: 3mm

COMMENTS:
These might also be referred to as coverplate screws.

Here is a fantastic product that lots of others have actually bought at the exact same time.

56T 0.8 P Spur Gear

This is the 56 Tooth Spur Equipment
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building and construction
Black in color
.8 metric pitch

CONSISTS OF:
One 56T 0.8 Pitch Spur Equipment

REQUIRES:
Assembly onto car

This product compliments the main item right here.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Equipment
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

CONSISTS OF:
One 58T 0.8 Pitch Spur Equipment

REQUIRES:
Assembly onto car

Get this product to boost the one you read around.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Equipment
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

CONSISTS OF:
One 65T 0.8 metric pitch spur equipment

REQUIRES:
Installation on the car

SPECS:
Diameter: 2.12" (54mm)
Density: .23" (6mm)

Here is one more product that compliments the product being discussed.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel centers fit on the end of the stub axles.

FEATURES:
Changes missing or harmed hex wheel centers
Centers are made of molded black plastic
Axle pins are steel

CONSISTS OF:
2 Hex Wheel Centers
2 2.5x12mm axle pins

REQUIRES:
Inserting pins through stub axles (4953) and positioning wheel centers in
    recessed area of axle carriers (4932).