Traxxas Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Equipment
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur equipment

REQUIRES:
Installation on the car

SPECIFICATIONS:
Size: 2.16" (55mm)
Thickness: .23" (6mm)

The listed below item additionally sets actually well with the item being talked about.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum building and construction

INCLUDES:
One slipper pressure plate
One slipper hub

REQUIRES:
Installation onto car.

Below is a wonderful item that many others have purchased the same time.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Components for both nitro and electric Revo and Maxx trucks

INCLUDES:
Two Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Recommendations

REQUIRES:
Disassembly of slipper clutch

Below is another item that compliments the item being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the above talked about item.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FUNCTIONS:
Black plastic and metal building and construction

INCLUDES:
Two various plasting holders
One disk-shaped magnet
Two 8mm screws
Two 10mm screws

SPECIFICATIONS:
Magnet diameter: 5mm
Magnet thickness: 2mm

You will certainly like this item if you have the item above mentioned.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

COMMENTS:
These might also be described as coverplate screws.

Below is a wonderful item that many others have purchased the same time.

56T 0.8 P Spur Gear

This is the 56 Tooth Spur Equipment
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color
.8 metric pitch

INCLUDES:
One 56T 0.8 Pitch Spur Equipment

REQUIRES:
Assembly onto car

This item compliments the main item here.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Equipment
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

INCLUDES:
One 58T 0.8 Pitch Spur Equipment

REQUIRES:
Assembly onto car

Get this item to boost the one you read around.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Equipment
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur equipment

REQUIRES:
Installation on the car

SPECIFICATIONS:
Size: 2.12" (54mm)
Thickness: .23" (6mm)

Below is another item that compliments the item being talked about.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel centers fit on completion of the stub axles.

FEATURES:
Replaces missing or damaged hex wheel centers
Hubs are made of molded black plastic
Axle pins are steel

INCLUDES:
Two Hex Wheel Hubs
Two 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and putting wheel centers in
    recessed location of axle carriers (4932).