Traxxas Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

SUCHES AS:
One 68T 0.8 metric pitch spur gear

NEEDS:
Installation on the automobile

SPECS:
Diameter: 2.16" (55mm)
Density: .23" (6mm)

The listed below item also pairs truly well with the item being reviewed.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum building and construction

SUCHES AS:
One slipper pressure plate
One slipper hub

NEEDS:
Installation onto automobile.

Right here is a excellent item that several others have actually bought at the same time.

Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Package from Traxxas.

FEATURES:
Parts for both nitro and electrical Revo and Maxx trucks

SUCHES AS:
Two Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Recommendations

NEEDS:
Disassembly of slipper clutch

Right here is another item that praises the item being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This item praises the above reviewed item.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FUNCTIONS:
Black plastic and metal building and construction

SUCHES AS:
2 various plasting holders
One disk-shaped magnet
Two 8mm screws
Two 10mm screws

SPECS:
Magnet diameter: 5mm
Magnet thickness: 2mm

You will certainly enjoy this item if you have the item just above mentioned.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
6 black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Diameter: 3mm

REMARKS:
These may likewise be referred to as coverplate screws.

Right here is a excellent item that several others have actually bought at the same time.

56T 0.8 P Spur Gear

This is the 56 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color
.8 metric pitch

SUCHES AS:
One 56T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto automobile

This item praises the main item here.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

SUCHES AS:
One 58T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto automobile

Get this item to improve the one you read around.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

SUCHES AS:
One 65T 0.8 metric pitch spur gear

NEEDS:
Installation on the automobile

SPECS:
Diameter: 2.12" (54mm)
Density: .23" (6mm)

Right here is another item that praises the item being reviewed.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on the end of the stub axles.

FEATURES:
Changes missing or harmed hex wheel hubs
Hubs are made of molded black plastic
Axle pins are steel

SUCHES AS:
2 Hex Wheel Hubs
2 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and positioning wheel hubs in
    recessed location of axle carriers (4932).