Traxxas Spur Gear 62T 0.8 Pitch

This is the optional .8 Metric Pitch 62 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 62T 0.8 metric pitch spur gear

NEEDS:
Installation on the automobile

SPECS:
Diameter: 2" (51mm)
Thickness: .23" (6mm)

Right here is an additional thing that compliments the thing being reviewed.

Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Components for both nitro and electrical Revo and Maxx trucks

INCLUDES:
Three Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Instructions

NEEDS:
Disassembly of slipper clutch

This thing compliments the above reviewed thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly like this thing if you have the thing just above mentioned.

Hub Carriers

These are the Center Carriers for the
    Associated ProLite 4x4 Short Course Truck, ASCD71**.

FUNCTIONS:
Plastic building and construction

INCLUDES:
Two Center Carriers

NEEDS:
Four 3/16 x 3/8" ball bearings, DTXC1423

Right here is a fantastic thing that many others have purchased the exact same time.

17-T Pinion Gear Compatible With 32-Pitch

This is the Traxxas 17 Tooth 32 Pitch Pinion Gear.

FEATURES:
Hardened steel building and construction
0.8 metric pitch, suitable with 32 pitch spur gears
Fits 0.196" (5mm) size motor shafts

INCLUDES:
17 Tooth 32 Pitch Pinion Gear with Set Screw

This thing compliments the main item below.



These are the Ball Cups for the
    Associated ProLite 4x4 Short Course Truck, ASCD71**.

FUNCTIONS:
Plastic building and construction
Threads onto and anchors suspension and guiding linkages

INCLUDES:
Fourteen Ball Cups

Get this thing to boost the one you read around.

Cover, Gear Upper & Lower-Use W/Motor Plate Tra3977x

Right here is an additional thing that compliments the thing being reviewed.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These belong to the slipper assembly.

FEATURES:
Aluminum building and construction

INCLUDES:
One slipper pressure plate
One slipper hub

NEEDS:
Installation onto automobile.

Want an additional fantastic thing to enhance the above stated thing?

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur gear

NEEDS:
Installation on the automobile

SPECS:
Diameter: 2.12" (54mm)
Thickness: .23" (6mm)

This thing compliments the above reviewed thing.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
Changes used or harmed lower chassis braces

INCLUDES:
Right and left lower chassis braces

NEEDS:
Installation on the E-Maxx

SPECS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Thickness: .43" (11mm)

This thing compliments the above reviewed thing.

Box, Receiver Sealed W/Silicon

This is the Receiver Box for the Traxxas E-Maxx Truck.

FEATURES:
Changes damaged receiver boxes
Constructed of black plastic

INCLUDES:
One top and bottom half receiver box for the Traxxas E-Maxx
Hardware

NEEDS:
Installing receiver and bolting receiver box to chassis.