Traxxas Spur Gear 62T 0.8 Pitch

This is the optional .8 Metric Pitch 62 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black in color
.8 metric pitch

CONSISTS OF:
One 62T 0.8 metric pitch spur gear

REQUIRES:
Setup on the automobile

SPECS:
Diameter: 2" (51mm)
Thickness: .23" (6mm)

Below is another thing that praises the thing being reviewed.

Rebuild Kit Hd Slipper Clutch

This is the Strong Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Components for both nitro and electrical Revo and Maxx trucks

CONSISTS OF:
3 Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

This thing praises the above reviewed thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly like this thing if you have the thing earlier pointed out.

Hub Carriers

These are the Center Carriers for the
    Associated ProLite 4x4 Brief Course Truck, ASCD71**.

FEATURES:
Plastic construction

CONSISTS OF:
Two Center Carriers

REQUIRES:
4 3/16 x 3/8" ball bearings, DTXC1423

Below is a wonderful thing that many others have actually purchased the exact same time.

17-T Pinion Gear Compatible With 32-Pitch

This is the Traxxas 17 Tooth 32 Pitch Pinion Gear.

FEATURES:
Solidified steel construction
0.8 metric pitch, compatible with 32 pitch spur gears
Fits 0.196" (5mm) size motor shafts

CONSISTS OF:
17 Tooth 32 Pitch Pinion Gear with Set Screw

This thing praises the main item here.



These are the Ball Cups for the
    Associated ProLite 4x4 Brief Course Truck, ASCD71**.

FEATURES:
Plastic construction
Threads onto and anchors suspension and guiding linkages

CONSISTS OF:
Fourteen Ball Cups

Get this thing to enhance the one you read around.

Cover, Gear Upper & Lower-Use W/Motor Plate Tra3977x

Below is another thing that praises the thing being reviewed.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum construction

CONSISTS OF:
One slipper pressure plate
One slipper hub

REQUIRES:
Setup onto automobile.

Want another wonderful thing to match the above stated thing?

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black in color
.8 metric pitch

CONSISTS OF:
One 65T 0.8 metric pitch spur gear

REQUIRES:
Setup on the automobile

SPECS:
Diameter: 2.12" (54mm)
Thickness: .23" (6mm)

This thing praises the above reviewed thing.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black in color
Changes used or damaged lower chassis braces

CONSISTS OF:
Right and left lower chassis braces

REQUIRES:
Setup on the E-Maxx

SPECS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Thickness: .43" (11mm)

This thing praises the above reviewed thing.

Box, Receiver Sealed W/Silicon

This is the Receiver Box for the Traxxas E-Maxx Truck.

FEATURES:
Changes damaged receiver boxes
Constructed of black plastic

CONSISTS OF:
One top and bottom half receiver box for the Traxxas E-Maxx
Hardware

REQUIRES:
Setting up receiver and bolting receiver box to chassis.