Traxxas Spur Gear 50T Vxl

This is the optional 50T Spur Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One 50T Spur Gear

NEEDS:
Installation on the car

SPECIFICATIONS:
Outer Diameter: 27.4mm (1.1")
Inner Diameter: 5.5mm (0.22")

Many others have acquired this product along with the product that you are presently reviewing.

Spur Gear 45T Vxl

This is the 45T Spur Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One 45T Spur Gear

NEEDS:
Installation on the car

SPECIFICATIONS:
Outer Diameter: 24.75mm (0.97")
Inner Diameter: 5.5mm (0.22")
Width: 7mm (0.28")

Many others have acquired this product along with the product that you are presently reviewing.

Spur Gear 55T

This is the optional 55T Spur Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One 55T Spur Gear

NEEDS:
Installation on the car

SPECIFICATIONS:
Outer Diameter: 30mm (1.2")
Inner Diameter: 5.5mm (0.22")
Width: 7.2mm (0.28")

Below is a great product that lots of others have purchased the same time.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FEATURES:
Ideal replacement part for great tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building and construction

INCLUDES:
One Pinion Gear
One Set Screw

SPECIFICATIONS:
Teeth: 28
Pitch: 48

This product compliments the main item below.

Slipper Clutch, Complete (Incl

    This is the Total Slipper Clutch for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
One Slipper Clutch Center
One Clutch Pad
One Spring
One 3mm Locking Nut
1.5x6mm Pin

NEEDS:
Installation on the car

This product compliments the main item below.

2.5Mm X 15 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are perfect for locations where a screwdriver won't
reach. They can be tighteded with an allen wrench or ball driver. The screws
come in a range of sizes and lengths. This uses a 2.5mm balldriver
(BONR1110).

This is a superb addition to the product presently being gone over.

Waterproof Micro Digital Servo 0.11Sec / 69Oz @ 6V

WATERPROOF DIGITAL MICRO SERVO .11/69@6V SUITABLE FOR TRAXXAS 1/16

This product compliments the above gone over product.

Half Shafts, Center Front (1),

These are the Front/Rear Center Half Shafts for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Front Center Half Shaft
One Back Center Half Shaft
Four U-Joints

NEEDS:
Installation on the car

This product compliments the main item below.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
One Diff Ring Gear
One Pinion Gear

NEEDS:
Installation on the car