Traxxas Spur Gear 50T Vxl

This is the optional 50T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One 50T Spur Gear

NEEDS:
Installation on the vehicle

SPECS:
Outer Diameter: 27.4mm (1.1")
Inner Diameter: 5.5mm (0.22")

Lots of others have actually bought this thing along with the thing that you are currently reading about.

Spur Gear 45T Vxl

This is the 45T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One 45T Stimulate Gear

NEEDS:
Installation on the vehicle

SPECS:
Outer Diameter: 24.75mm (0.97")
Inner Diameter: 5.5mm (0.22")
Width: 7mm (0.28")

Lots of others have actually bought this thing along with the thing that you are currently reading about.

Spur Gear 55T

This is the optional 55T Stimulate Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One 55T Stimulate Gear

NEEDS:
Installation on the vehicle

SPECS:
Outer Diameter: 30mm (1.2")
Inner Diameter: 5.5mm (0.22")
Width: 7.2mm (0.28")

Right here is a great thing that lots of others have actually purchased the very same time.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FEATURES:
Suitable replacement part for great tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building and construction

CONSISTS OF:
One Pinion Gear
One Set Screw

SPECS:
Pearly whites: 28
Pitch: 48

This thing compliments the main item below.

Slipper Clutch, Complete (Incl

    This is the Complete Slipper Clutch for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Slipper Clutch Hub
One Clutch Pad
One Spring
One 3mm Locking Nut
1.5x6mm Pin

NEEDS:
Installation on the vehicle

This thing compliments the main item below.

2.5Mm X 15 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are ideal for locations where a screwdriver won't
reach. They can be tighteded with an allen wrench or ball driver. The screws
come in a variety of sizes and lengths. This uses a 2.5mm balldriver
(BONR1110).

This is a superb addition to the thing currently being talked about.

Waterproof Micro Digital Servo 0.11Sec / 69Oz @ 6V

WATERPROOF DIGITAL MICRO SERVO .11/69@6V SUITABLE FOR TRAXXAS 1/16

This thing compliments the above talked about thing.

Half Shafts, Center Front (1),

These are the Front/Rear Center Half Shafts for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Front Center Half Shaft
One Rear Center Half Shaft
Four U-Joints

NEEDS:
Installation on the vehicle

This thing compliments the main item below.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Diff Ring Gear
One Pinion Gear

NEEDS:
Installation on the vehicle