Traxxas Spur Gear 45T Vxl

This is the 45T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One 45T Stimulate Gear

REQUIRES:
Setup on the car

SPECIFICATIONS:
Outer Diameter: 24.75mm (0.97")
Inner Diameter: 5.5mm (0.22")
Width: 7mm (0.28")

You will certainly enjoy this item if you have the item above pointed out.

Spur Gear 50T Vxl

This is the optional 50T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One 50T Spur Gear

REQUIRES:
Setup on the car

SPECIFICATIONS:
Outer Diameter: 27.4mm (1.1")
Inner Diameter: 5.5mm (0.22")

Below is a wonderful product that many others have purchased the very same time.

Spur Gear 55T

This is the optional 55T Stimulate Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One 55T Stimulate Gear

REQUIRES:
Setup on the car

SPECIFICATIONS:
Outer Diameter: 30mm (1.2")
Inner Diameter: 5.5mm (0.22")
Width: 7.2mm (0.28")

Want an additional wonderful product to match the above stated product?

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building and construction, silver in color

INCLUDES:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

REQUIRES:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Diameter: 1/8"
Outside Diameter: .69" (17.5mm)

The listed below product also sets truly well with the product being discussed.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FEATURES:
Perfect replacement part for fine tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building and construction

INCLUDES:
One Pinion Gear
One Set Screw

SPECIFICATIONS:
Teeth: 28
Pitch: 48

This product compliments the above discussed product.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/16 scale car applications
Prewired with Traxxas high present port

INCLUDES:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

REQUIRES:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Ranked Capability: 1300mAh
Discharge Score: 25C continuous
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Adapter: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER take apart or customize pack circuitry in any way or puncture cells
NEVER place on combustible products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY stay out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm