Traxxas Spur Gear 45T Vxl

This is the 45T Spur Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One 45T Stimulate Gear

REQUIRES:
Setup on the car

SPECIFICATIONS:
Outer Size: 24.75mm (0.97")
Inner Size: 5.5mm (0.22")
Width: 7mm (0.28")

You will like this thing if you have the thing previously pointed out.

Spur Gear 50T Vxl

This is the optional 50T Spur Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One 50T Spur Gear

REQUIRES:
Setup on the car

SPECIFICATIONS:
Outer Size: 27.4mm (1.1")
Inner Size: 5.5mm (0.22")

Right here is a excellent product that several others have actually bought at the same time.

Spur Gear 55T

This is the optional 55T Stimulate Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One 55T Stimulate Gear

REQUIRES:
Setup on the car

SPECIFICATIONS:
Outer Size: 30mm (1.2")
Inner Size: 5.5mm (0.22")
Width: 7.2mm (0.28")

Want one more excellent product to enhance the above mentioned product?

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building, silver in color

CONSISTS OF:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

REQUIRES:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outdoors Size: .69" (17.5mm)

The listed below product likewise pairs really well with the product being discussed.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FEATURES:
Perfect replacement part for fine tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building

CONSISTS OF:
One Pinion Gear
One Set Screw

SPECIFICATIONS:
Pearly whites: 28
Pitch: 48

This product praises the above discussed product.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/16 scale car applications
Prewired with Traxxas high current adapter

CONSISTS OF:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Port

REQUIRES:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 11.1V
Rated Capability: 1300mAh
Discharge Rating: 25C continuous
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Port: ElectriFly
Watt Hours: 14Wh

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER take apart or modify pack wiring in any way or leak cells
NEVER place on flammable products or leave unattended throughout
    charging
ALWAYS Charge in a fireproof location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm