Traxxas Spring Shock White GTR Long 0.892 Blue (2)

This is the set of Traxxas Long GTR Shock Springs
with 0.892 Blue Compression Rate.

FEATURES:
Steel construction, white in color
Dab of paint on end of spring shows compression rate

CONSISTS OF:
2 Long 0.892 Blue Rate GTR Shock Springs

SPECIFICATIONS:
Length: 1.8" (45mm)
Wire Diameter: 0.043" (1.1mm)

Many others have actually gotten this item together with the item that you are presently reading about.

Spring Shock White Gtr Xxlong 1.004 Rate Blue (1 Pair)

This is the set of Traxxas Additional Additional Long GTR Shock Springs
with 1.004 Blue Compression Rate.

FEATURES:
Steel construction, white in color
Dab of paint on end of spring shows compression rate

CONSISTS OF:
2 Additional Additional Long 1.004 Blue Rate GTR Shock Springs

SPECIFICATIONS:
Length: 2.2" (56mm)
Wire Diameter: 0.043" (1.1mm)

You will certainly enjoy this product if you have the product previously mentioned.

Shocks, Gtr Long Hard-Anodized, Ptfe-Coated Bodies With Tin Shaf

This is a pair of Long Traxxas GTR Shocks.

FEATURES:
Tough anodized PTFE aluminum bodies
TiN layered shafts

CONSISTS OF:
2 Long Traxxas GTR Shocks
Bottle of Silicone Shock Oil

NEEDS:
Springs of modeler's option

SPECIFICATIONS:
Length: 3.3" (84mm) from upper and lower installing hole centers

Get this item to improve the one you are reading around.

Shocks, Gtr Xx-Long Hard Anodized, Ptfe Coated Bodies W/ Tin Sha

This is a pair of XX-Long Traxxas GTR Shocks.

FEATURES:
Tough anodized PTFE aluminum bodies
TiN layered shafts

CONSISTS OF:
2 XX-Long Traxxas GTR Shocks
Bottle of Silicone Shock Oil

NEEDS:
Springs of modeler's option

SPECIFICATIONS:
Length: 3.9" (100.5mm) from upper and lower installing hole centers

The below item likewise pairs really well with the item being discussed.

Motor Heat Sink

This is the initial replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

You will certainly enjoy this product if you have the product previously mentioned.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Many others have actually gotten this item together with the item that you are presently reading about.

Suspension Arms Guards Front Stampede 4X4

These are the Front Suspension Arm Guards for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite plastic construction
Black in color

CONSISTS OF:
2 front suspension arm guards
2 guard spacers
2 hollow balls
Eight 3x16mm button head cap screws

NEEDS:
Installation onto front suspension