Traxxas Spring Shock White GTR Long 0.892 Blue (2)

This is the set of Traxxas Long GTR Shock Springs
with 0.892 Blue Compression Rate.

FEATURES:
Steel construction, white in color
Dab of paint on end of spring suggests compression rate

CONSISTS OF:
2 Long 0.892 Blue Rate GTR Shock Springs

SPECIFICATIONS:
Length: 1.8" (45mm)
Wire Diameter: 0.043" (1.1mm)

Several others have bought this thing along with the thing that you are currently checking out.

Spring Shock White Gtr Xxlong 1.004 Rate Blue (1 Pair)

This is the set of Traxxas Extra Extra Long GTR Shock Springs
with 1.004 Blue Compression Rate.

FEATURES:
Steel construction, white in color
Dab of paint on end of spring suggests compression rate

CONSISTS OF:
2 Extra Extra Long 1.004 Blue Rate GTR Shock Springs

SPECIFICATIONS:
Length: 2.2" (56mm)
Wire Diameter: 0.043" (1.1mm)

You will love this thing if you have the thing just above mentioned.

Shocks, Gtr Long Hard-Anodized, Ptfe-Coated Bodies With Tin Shaf

This is a pair of Long Traxxas GTR Shocks.

FEATURES:
Tough anodized PTFE aluminum bodies
TiN covered shafts

CONSISTS OF:
2 Long Traxxas GTR Shocks
Bottle of Silicone Shock Oil

NEEDS:
Springs of modeler's choice

SPECIFICATIONS:
Length: 3.3" (84mm) from upper and lower installing hole centers

Get this thing to boost the one you are reading about.

Shocks, Gtr Xx-Long Hard Anodized, Ptfe Coated Bodies W/ Tin Sha

This is a pair of XX-Long Traxxas GTR Shocks.

FEATURES:
Tough anodized PTFE aluminum bodies
TiN covered shafts

CONSISTS OF:
2 XX-Long Traxxas GTR Shocks
Bottle of Silicone Shock Oil

NEEDS:
Springs of modeler's choice

SPECIFICATIONS:
Length: 3.9" (100.5mm) from upper and lower installing hole centers

The listed below thing also sets really well with the thing being discussed.

Motor Heat Sink

This is the initial replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

You will love this thing if you have the thing just above mentioned.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Several others have bought this thing along with the thing that you are currently checking out.

Suspension Arms Guards Front Stampede 4X4

These are the Front Suspension Arm Guards for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite plastic construction
Black in color

CONSISTS OF:
2 front suspension arm guards
2 guard spacers
2 hollow balls
8 3x16mm button head cap screws

NEEDS:
Installation onto front suspension