Traxxas Spring, Shock (Gtr) (2) (2.22

These are the optional Black Rate GTR Shock Springs for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Steel building
Red in color
2.22 rate, black

INCLUDES:
Two GTR Shock Springs

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Length: 19.75mm (0.78")
Outer Diameter: 13.75mm (0.54")
Inner Diameter: 10.95mm (0.43")
Wire Diameter: 1.4mm (0.06")

You will love this thing if you have the thing above stated.

Shocks, Gtr Hard Anodized, Tef

These are the GTR Hard Anodized Coated Shocks from Traxxas.

FEATURES:
Totally put together
Tough anodized
Titanium shock shafts

INCLUDES:
Two Front Shocks
Two Rear Shocks
One Bottle of 40wt Silicone Shock Oil
Instruction sheet

REQUIRES:
Shock Springs

SPECIFICATIONS:
Length Totally Compressed (center hole to center hole): 39mm (1.5")
Length Totally Extended (center hole to center hole): 47mm (1.9")

This product is often gotten with the above stated product.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Grey in color

INCLUDES:
One Chassis

REQUIRES:
Installation on automobile

SPECIFICATIONS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

This product compliments the above gone over product.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

INCLUDES:
Two front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Installation over front diff assembly

The below product likewise sets actually well with the product being gone over.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite building
Red in color

INCLUDES:
4 Pushrods
Eight Hollow Balls

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Length: 70mm (2.8")
Diameter: 5mm (0.20")

This is a great enhancement to the product currently being gone over.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Hyperlinks for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building
Red in color

INCLUDES:
4 Front/Rear Toe Hyperlinks
Eight Hollow Balls

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Length: 86mm (3.4")
Diameter: 5mm (0.20")

Here is another product that compliments the product being gone over.

60Wt Silicone Shock Oil, 2Oz

This is a bottle of 60WT Associated Silicone Shock Oil used with oil shocks.

FEATURES:
100% Pure Silicone oil
Will not thin in heat or thicken in cold weather

INCLUDES:
One Bottle of Silicone Oil

SPECIFICATIONS:
60wt (the greater the weight number the thicker the oil)
2oz bottle

This product compliments the above gone over product.



This is a male Traxxas Connector plug to female T-Style Ultra plug adapter from ProTek R/C. This adapter includes an authentic Traxxas High-Current Connector for the supreme in effectiveness, ease of use and high present handling capabilities.

ProTek R/C is an A Main Hobbies brand name.


This product is often gotten with the above stated product.



This is the Duratrax Onyx 7.4V 2000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale vehicle applications
Prewired with Traxxas high present adapter

INCLUDES:
7.4V 2000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 7.4V
Ranked Capacity: 2000mAh
Discharge Rating: 25C continuous
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.7oz (105g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Connector: ElectriFly
Watt Hours: 15Wh

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER disassemble or customize pack circuitry in any way or puncture cells
NEVER put on flammable products or leave unattended throughout
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights such as wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm