Traxxas Spring, Shock (Gtr) (2) (2.22

These are the optional Black Rate GTR Shock Springs for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Steel construction
Red in color
2.22 rate, black

INCLUDES:
Two GTR Shock Springs

NEEDS:
Setup on the vehicle

SPECS:
Length: 19.75mm (0.78")
Outer Size: 13.75mm (0.54")
Inner Size: 10.95mm (0.43")
Wire Size: 1.4mm (0.06")

You will certainly like this item if you have the item previously discussed.

Shocks, Gtr Hard Anodized, Tef

These are the GTR Hard Anodized Coated Shocks from Traxxas.

FEATURES:
Completely assembled
Tough anodized
Titanium shock shafts

INCLUDES:
Two Front Shocks
Two Rear Shocks
One Bottle of 40wt Silicone Shock Oil
Instruction sheet

NEEDS:
Shock Springs

SPECS:
Length Completely Compressed (center hole to center hole): 39mm (1.5")
Length Completely Extended (center hole to center hole): 47mm (1.9")

This item is often gotten with the above pointed out item.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon construction
Grey in color

INCLUDES:
One Chassis

NEEDS:
Setup on vehicle

SPECS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

This item compliments the above reviewed item.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
Two front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

NEEDS:
Setup over front diff assembly

The below item additionally sets actually well with the item being reviewed.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite construction
Red in color

INCLUDES:
4 Pushrods
8 Hollow Balls

NEEDS:
Setup on the vehicle

SPECS:
Length: 70mm (2.8")
Size: 5mm (0.20")

This is a superb addition to the item currently being reviewed.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Hyperlinks for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction
Red in color

INCLUDES:
4 Front/Rear Toe Hyperlinks
8 Hollow Balls

NEEDS:
Setup on the vehicle

SPECS:
Length: 86mm (3.4")
Size: 5mm (0.20")

Here is one more item that compliments the item being reviewed.

60Wt Silicone Shock Oil, 2Oz

This is a bottle of 60WT Associated Silicone Shock Oil utilized with oil shocks.

FEATURES:
100% Pure Silicone oil
Will not thin in heat or thicken in winter

INCLUDES:
One Bottle of Silicone Oil

SPECS:
60wt (the higher the weight number the thicker the oil)
2oz bottle

This item compliments the above reviewed item.



This is a male Traxxas Connector plug to female T-Style Ultra plug adapter from ProTek R/C. This adapter features a genuine Traxxas High-Current Connector for the ultimate in efficiency, ease of use and high existing handling capabilities.

ProTek R/C is an A Main Hobbies brand name.


This item is often gotten with the above pointed out item.



This is the Duratrax Onyx 7.4V 2000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale vehicle applications
Prewired with Traxxas high existing connector

INCLUDES:
7.4V 2000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

NEEDS:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 7.4V
Rated Capacity: 2000mAh
Release Rating: 25C constant
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.7oz (105g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Connector: ElectriFly
Watt Hours: 15Wh

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER permit to Release below 2.5V per cell
NEVER disassemble or customize pack circuitry in any method or leak cells
NEVER place on combustible products or leave ignored during
    charging
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
ALWAYS shut out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm