Traxxas Spring, Shock (Gtr) (2) (2.22

These are the optional Black Rate GTR Shock Springs for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Steel building and construction
Red in color
2.22 rate, black

CONSISTS OF:
Two GTR Shock Springs

NEEDS:
Installation on the automobile

SPECS:
Length: 19.75mm (0.78")
Outer Diameter: 13.75mm (0.54")
Inner Diameter: 10.95mm (0.43")
Wire Diameter: 1.4mm (0.06")

You will love this thing if you have the thing above pointed out.

Shocks, Gtr Hard Anodized, Tef

These are the GTR Hard Anodized Coated Shocks from Traxxas.

FEATURES:
Totally assembled
Tough anodized
Titanium shock shafts

CONSISTS OF:
Two Front Shocks
Two Rear Shocks
One Bottle of 40wt Silicone Shock Oil
Direction sheet

NEEDS:
Shock Springs

SPECS:
Length Totally Compressed (center hole to center hole): 39mm (1.5")
Length Totally Extended (center hole to center hole): 47mm (1.9")

This item is often bought with the above discussed item.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Grey in color

CONSISTS OF:
One Chassis

NEEDS:
Installation on automobile

SPECS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

This item compliments the above discussed item.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Two front bulkhead halves
Four 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

NEEDS:
Installation over front diff assembly

The listed below item also sets really well with the item being discussed.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite building and construction
Red in color

CONSISTS OF:
Four Pushrods
Eight Hollow Balls

NEEDS:
Installation on the automobile

SPECS:
Length: 70mm (2.8")
Diameter: 5mm (0.20")

This is a wonderful addition to the item currently being discussed.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Hyperlinks for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Red in color

CONSISTS OF:
Four Front/Rear Toe Hyperlinks
Eight Hollow Balls

NEEDS:
Installation on the automobile

SPECS:
Length: 86mm (3.4")
Diameter: 5mm (0.20")

Right here is an additional item that compliments the item being discussed.

60Wt Silicone Shock Oil, 2Oz

This is a bottle of 60WT Associated Silicone Shock Oil used with oil shocks.

FEATURES:
100% Pure Silicone oil
Will not thin in heat or thicken in cold weather

CONSISTS OF:
One Bottle of Silicone Oil

SPECS:
60wt (the higher the weight number the thicker the oil)
2oz bottle

This item compliments the above discussed item.



This is a male Traxxas Adapter plug to female T-Style Ultra plug adapter from ProTek R/C. This adapter features a real Traxxas High-Current Adapter for the ultimate in performance, ease of use and high present handling capabilities.

ProTek R/C is an A Main Hobbies brand name.


This item is often bought with the above discussed item.



This is the Duratrax Onyx 7.4V 2000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale car applications
Prewired with Traxxas high present adapter

CONSISTS OF:
7.4V 2000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

NEEDS:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 7.4V
Ranked Capability: 2000mAh
Discharge Rating: 25C constant
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.7oz (105g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Adapter: ElectriFly
Watt Hours: 15Wh

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER take apart or customize pack circuitry in any way or leak cells
NEVER place on flammable products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids
All weights such as wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm