Traxxas Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set consists of the spring retainers that hold the springs in
restaurant over the shock body and the piston heads that control the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on a lot of Traxxas nitro and electrical powered vehicles.
Two hole piston moving towards greater dampening or two hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and two lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.

This thing is often purchased with the above pointed out thing.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Secures the Chassis.

FEATURES:
Durable Plastic Construction
Black in Color

CONSISTS OF:
One Bumper
One Team RPM Decal

REQUIRES:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

COMMENTS:
The Factory Number is #81162

This thing compliments the main item here.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Black steel building

CONSISTS OF:
Six steel shoulder screws

SPECIFICATIONS:
Length: 12mm
Size: 3mm

Here is one more thing that compliments the thing being talked about.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock including the shock oil.

FEATURES:
Nylon building

CONSISTS OF:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

REQUIRES:
Other shock elements

SPECIFICATIONS:
Size Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The below thing likewise pairs really well with the thing being talked about.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

CONSISTS OF:
Traxxas Titan 550 Motor, two capacitors and two leads with connectors

REQUIRES:
Setting up in vehicle

SPECIFICATIONS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not offered

Here is one more thing that compliments the thing being talked about.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Numerous others have purchased this thing in addition to the thing that you are currently reviewing.

Rod Ends Long & Short

This set of rod ends, balls, and screws is utilized on all but 4 of Traxxas'
kits. It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet.

Includes: 4 brief rod ends (17mm)
16 long rod ends (19mm)
2 ball screws
18 hollow ball connectors

pcd 01/23/94