Traxxas Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set contains the spring retainers that hold the springs in
location over the shock body and the piston heads that control the amount
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on many Traxxas nitro and electrical powered vehicles.
Two hole piston moving towards higher dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and 2 lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.

This product is regularly gotten with the above stated product.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Vehicle and Safeguards the Chassis.

FEATURES:
Long lasting Plastic Building
Black in Color

CONSISTS OF:
One Bumper
One Group RPM Decal

REQUIRES:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This product praises the main item below.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Black steel construction

CONSISTS OF:
Six steel shoulder screws

SPECS:
Length: 12mm
Size: 3mm

Right here is one more product that praises the product being discussed.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock consisting of the shock oil.

FEATURES:
Nylon construction

CONSISTS OF:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

REQUIRES:
Other shock components

SPECS:
Size Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The listed below product additionally sets really well with the product being discussed.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

CONSISTS OF:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with ports

REQUIRES:
Installing in automobile

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

Right here is one more product that praises the product being discussed.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for models with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Numerous others have actually gotten this product together with the product that you are currently reading about.

Rod Ends Long & Short

This set of rod ends, balls, and screws is used on all however four of Traxxas'
packages. It WILL NOT WORK ON: the Sledgehammer, initial Hawk, Cat, or Bullet.

Includes: 4 brief rod ends (17mm)
16 long rod ends (19mm)
2 ball screws
18 hollow ball ports

pcd 01/23/94