Traxxas Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set consists of the spring retainers that hold the springs in
restaurant over the shock body and the piston heads that control the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on many Traxxas nitro and electrical powered vehicles.
Two hole piston moving towards higher dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and two lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to set up parts.

This item is frequently bought with the above pointed out item.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Automobile and Safeguards the Chassis.

FEATURES:
Long lasting Plastic Construction
Black in Color

CONSISTS OF:
One Bumper
One Group RPM Decal

REQUIRES:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This item praises the main item right here.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FEATURES:
Black steel building and construction

CONSISTS OF:
6 steel shoulder screws

SPECS:
Length: 12mm
Size: 3mm

Here is an additional item that praises the item being discussed.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock consisting of the shock oil.

FEATURES:
Nylon building and construction

CONSISTS OF:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

REQUIRES:
Other shock parts

SPECS:
Size Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The listed below item additionally sets really well with the item being discussed.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

CONSISTS OF:
Traxxas Titan 550 Motor, two capacitors and two leads with ports

REQUIRES:
Setting up in vehicle

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

Here is an additional item that praises the item being discussed.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for models with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur equipment

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Lots of others have bought this item along with the item that you are presently reading about.

Rod Ends Long & Short

This set of rod ends, balls, and screws is utilized on all but 4 of Traxxas'
packages. It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet.

Includes: 4 short rod ends (17mm)
16 long rod ends (19mm)
2 ball screws
18 hollow ball ports

pcd 01/23/94