Traxxas Spring Preload Spacers

This is the Traxxas replacement #3769 Spring Pre-Load Spacers
that features the Stampede and Rustler trucks together with the
Black Long Shocks (TRAC9160) and Black XX-Long shocks (TRAC9162).

FEATURES:
Made from a black plastic/nylon material.
Used to assist pre-load the shock springs.
This is set up on the top of the shock springs.
Enough for 1 pair of shocks.

INCLUDES:
2 spacers 1mm thick
2 "" 2mm ""
2 "" 3mm ""
2 "" 4mm ""
REMARKS:
Appears like a letter "C"
Likewise fits shocks with a 13.5mm outside diameter body.

AXY
3/25/95

The below item additionally pairs really well with the item being talked about.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural sleek color

CONSISTS OF:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

Want an additional terrific item to enhance the above stated item?

Springs White (Rr) (2)

This is a pair of Traxxas White Back Springs.

FEATURES:
Painted white
Steel building

CONSISTS OF:
Two springs

SPECIFICATIONS:
Length: 3.19" (81mm)
Inside diameter: .61" (15mm)
Outside diameter: .71" (18mm)

This item praises the main item here.

Red Springs 2.5 Rate 2Pc

These are the Replacement Springs for the Traxxas T-Maxx.
These mount to the Shocks and provide the damper for the Suspension.

FEATURES:
Spring Steel Building and construction
Red in Color
Medium Stress

CONSISTS OF:
Two Red Medium Springs

NEEDS:
Assembly onto T-Maxx

SPECIFICATIONS:
Length: 3.25" Uncompressed
1.20" Compressed JiM 8.02.02
Size: .75" ir/kh
Wire Size: 1/16" 8/05/02

You will certainly like this item if you have the item earlier pointed out.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One left and best steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

You will certainly like this item if you have the item earlier pointed out.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel centers fit on the end of the stub axles.

FEATURES:
Replaces missing out on or damaged hex wheel centers
Hubs are made from molded black plastic
Axle pins are steel

CONSISTS OF:
Two Hex Wheel Hubs
Two 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and putting wheel centers in
    recessed area of axle carriers (4932).

You will certainly like this item if you have the item earlier pointed out.

Axle Pins 2.5 X 12Mm 4

This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck.
These pins go through the stub axles on each wheel,
the wheel centers are then placed over these pins.

FEATURES:
Replaces missing out on axle pins
Axle pins are steel

CONSISTS OF:
Four 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and setting up wheel centers
    (4954) over pins.