Traxxas Spring Preload Spacers

This is the Traxxas replacement #3769 Spring Pre-Load Spacers
that includes the Stampede and Rustler trucks in addition to the
Black Long Shocks (TRAC9160) and Black XX-Long shocks (TRAC9162).

FEATURES:
Made of a black plastic/nylon material.
Used to help pre-load the shock springs.
This is set up on the top of the shock springs.
Enough for 1 pair of shocks.

INCLUDES:
2 spacers 1mm thick
2 "" 2mm ""
2 "" 3mm ""
2 "" 4mm ""
COMMENTS:
Looks like a letter "C"
Also fits shocks with a 13.5mm outside size body.

AXY
3/25/95

The below product additionally sets truly well with the product being gone over.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel construction
Natural polished color

INCLUDES:
Twelve Body Clips

SPECS:
Length: 26mm

Want an additional wonderful product to compliment the above stated product?

Springs White (Rr) (2)

This is a pair of Traxxas White Back Springs.

FEATURES:
Painted white
Steel construction

INCLUDES:
2 springs

SPECS:
Length: 3.19" (81mm)
Inside size: .61" (15mm)
Outdoors size: .71" (18mm)

This product praises the main item here.

Red Springs 2.5 Rate 2Pc

These are the Replacement Springs for the Traxxas T-Maxx.
These install to the Shocks and supply the damper for the Suspension.

FEATURES:
Spring Steel Building and construction
Red in Color
Medium Stress

INCLUDES:
2 Red Medium Springs

REQUIRES:
Assembly onto T-Maxx

SPECS:
Length: 3.25" Uncompressed
1.20" Compressed JiM 8.02.02
Size: .75" ir/kh
Wire Size: 1/16" 8/05/02

You will enjoy this thing if you have the thing earlier mentioned.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

INCLUDES:
One left and right steering blocks

REQUIRES:
5x11x4mm bearings (DTXC1547)

You will enjoy this thing if you have the thing earlier mentioned.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel hubs fit on completion of the stub axles.

FEATURES:
Replaces missing or damaged hex wheel hubs
Centers are made from molded black plastic
Axle pins are steel

INCLUDES:
2 Hex Wheel Centers
2 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and placing wheel hubs in
    recessed area of axle carriers (4932).

You will enjoy this thing if you have the thing earlier mentioned.

Axle Pins 2.5 X 12Mm 4

This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck.
These pins go through the stub axles on each wheel,
the wheel hubs are then positioned over these pins.

FEATURES:
Replaces missing axle pins
Axle pins are steel

INCLUDES:
4 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and installing wheel hubs
    (4954) over pins.