Traxxas Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas kits
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are set up on either
side the differential gear or the spur gear.

PACKAGE
INCLUDES: Two notched rings

Get this product to enhance the one you are reading around.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS kits that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FEATURES:
Made from RULON

INCLUDES:
Twelve pegs ***Colors might differ from picture***

SPECS:
length - 3.5mm
diameter - 3mm

REMARKS:
These pegs enter the holes on the side of the spur gear.

Numerous others have purchased this product together with the product that you are currently checking out.

70T Spur Gear 32P

This is the spur gear (or primary gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Functions: Difficult nylon building
Drilled for light weight

Specs: Teeth-70
Pitch-32

Requires: Nothing, this is a direct replacement part.

Comments: This is the same gear that can be found in the truck package.

2/10/97
AST

This product is often purchased with the above mentioned product.

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch design stimulate gear.

INCLUDES:
One 72 tooth spur gear

NEEDS:
The other parts of that comprise the slipper clutch are:
    #1994 - tension spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - top gear shaft to slipper adapter TRAC4185

SPECS:
Tooth: 72
Pitch: 32

You will love this item if you have the item earlier mentioned.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all variations of the T-Maxx and E-Maxx
Nylon mix building, black in color
Locknuts used at the chassis and skid plate mounting holes to
    safely lock bulkheads in location, decreasing the possibility of damage

INCLUDES:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

Right here is a great product that numerous others have bought at the very same time.

Slipper Tension Spring

This is the replacement slipper tension spring set for the Traxxas kits that
have slipper clutches (Rad 2, Hawk 2, TRX-1, Blue Eagles).

PLAN
INCLUDES:
Slipper tension spring (1)
Stimulate gear bushing (1) -- white
4mm Locknut with nylon insert (1)

This product praises the main item below.

Slipper Pressure Plate (1)

This is a replacement parts set for the Traxxas Rad2, Hawk2, Nitro Hawk,
Nitro Street, TRX-T Eagle, Blue Eagle, and Blue Eagle LSII.

This Package Includes:
(1) Slipper (or differential) pressure plate

JBN 1.25.94 *8)