Traxxas Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These belong to the slipper assembly.

FEATURES:
Aluminum building and construction

INCLUDES:
One slipper pressure plate
One slipper center

REQUIRES:
Installation onto automobile.

Frequently acquired with the product that you are presently reviewing.

Rebuild Kit Hd Slipper Clutch

This is the Strong Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Parts for both nitro and electrical Revo and Maxx trucks

INCLUDES:
3 Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

The listed below product likewise pairs truly well with the product being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Several others have actually acquired this product together with the product that you are presently reviewing.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur gear

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Diameter: 2.16" (55mm)
Density: .23" (6mm)

Get this product to boost the one you are reading about.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur gear

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Diameter: 2.12" (54mm)
Density: .23" (6mm)

This product is often acquired with the above discussed product.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Diameter: 3mm

COMMENTS:
These might likewise be referred to as coverplate screws.

Several others have actually acquired this product together with the product that you are presently reviewing.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal building and construction

INCLUDES:
Two various plasting holders
One disk-shaped magnet
3 8mm screws
3 10mm screws

SPECIFICATIONS:
Magnet diameter: 5mm
Magnet density: 2mm

You will certainly like this thing if you have the thing above discussed.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building and construction
Steel 10x15x4mm ball bearing with blue rubber seal
Utilized on slipper shaft

INCLUDES:
One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES:
Installation on to slipper shaft
Staying clutch pieces

Get this product to boost the one you are reading about.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

INCLUDES:
One 54T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto automobile

The listed below product likewise pairs truly well with the product being discussed.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

INCLUDES:
One 58T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto automobile