Traxxas Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum building and construction

INCLUDES:
One slipper pressure plate
One slipper center

REQUIRES:
Setup onto automobile.

Regularly acquired with the thing that you are currently reviewing.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Components for both nitro and electrical Revo and Maxx trucks

INCLUDES:
Three Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

REQUIRES:
Disassembly of slipper clutch

The below thing also sets actually well with the thing being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Numerous others have acquired this thing in addition to the thing that you are currently reviewing.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur gear

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Size: 2.16" (55mm)
Thickness: .23" (6mm)

Get this thing to boost the one you read around.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building and construction, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur gear

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Size: 2.12" (54mm)
Thickness: .23" (6mm)

This thing is regularly acquired with the above discussed thing.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

REMARKS:
These may also be described as coverplate screws.

Numerous others have acquired this thing in addition to the thing that you are currently reviewing.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FUNCTIONS:
Black plastic and metal building and construction

INCLUDES:
Two various plasting holders
One disk-shaped magnet
Three 8mm screws
Three 10mm screws

SPECIFICATIONS:
Magnet size: 5mm
Magnet thickness: 2mm

You will certainly enjoy this item if you have the item just above discussed.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FUNCTIONS:
6061-T6 anodized blue aluminum building and construction
Steel 10x15x4mm ball bearing with blue rubber seal
Utilized on slipper shaft

INCLUDES:
One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES:
Setup on to slipper shaft
Remaining clutch pieces

Get this thing to boost the one you read around.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

INCLUDES:
One 54T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto automobile

The below thing also sets actually well with the thing being gone over.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

INCLUDES:
One 58T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto automobile