Traxxas Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum building and construction

CONSISTS OF:
One slipper pressure plate
One slipper hub

NEEDS:
Setup onto car.

Often bought with the thing that you are presently reviewing.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Package from Traxxas.

FEATURES:
Elements for both nitro and electrical Revo and Maxx trucks

CONSISTS OF:
Three Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

NEEDS:
Disassembly of slipper clutch

The below thing additionally pairs truly well with the thing being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Numerous others have actually bought this thing along with the thing that you are presently reviewing.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

CONSISTS OF:
One 68T 0.8 metric pitch spur gear

NEEDS:
Setup on the car

SPECS:
Diameter: 2.16" (55mm)
Thickness: .23" (6mm)

Get this thing to improve the one you read around.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

CONSISTS OF:
One 65T 0.8 metric pitch spur gear

NEEDS:
Setup on the car

SPECS:
Diameter: 2.12" (54mm)
Thickness: .23" (6mm)

This thing is often bought with the above stated thing.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Diameter: 3mm

COMMENTS:
These might also be referred to as coverplate screws.

Numerous others have actually bought this thing along with the thing that you are presently reviewing.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal building and construction

CONSISTS OF:
2 various plasting holders
One disk-shaped magnet
Three 8mm screws
Three 10mm screws

SPECS:
Magnet size: 5mm
Magnet thickness: 2mm

You will enjoy this product if you have the product previously mentioned.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building and construction
Steel 10x15x4mm ball bearing with blue rubber seal
Utilized on slipper shaft

CONSISTS OF:
One aluminum adapter
One 10x15x4mm ball bearing

NEEDS:
Setup on to slipper shaft
Staying clutch pieces

Get this thing to improve the one you read around.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

CONSISTS OF:
One 54T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto car

The below thing additionally pairs truly well with the thing being reviewed.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

CONSISTS OF:
One 58T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto car