Traxxas Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS sets that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FEATURES:
Made from RULON

INCLUDES:
Twelve pegs ***Colors might differ from photo***

SPECIFICATIONS:
length - 3.5mm
size - 3mm

REMARKS:
These pegs enter the holes on the side of the spur gear.

Frequently purchased with the item that you are currently checking out.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas sets
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential gear or the spur gear.

PACKAGE
INCLUDES: 2 notched rings

Frequently purchased with the item that you are currently checking out.

66T Spur Gear/32P

This package consists of the direct replacement 66tooth 32pitch stimulate
gear that comes consisted of with the Traxxas Nitro Hawk.

FEATURES:
direct replacement black plastic construction

INCLUDES:
1 66tooth 32pitch stimulate gear

SPECIFICATIONS:
2 1/8" size, 3/8" thick

REQUIRES:
absolutely nothing, this is a replacement part

REMARKS:
the rulon slipper pegs that are installed in the 12 inner
holes of the spur gear are TRAC9685.

AXY
1/10/94

You will like this product if you have the product previously pointed out.

70T Spur Gear 32P

This is the spur gear (or primary gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Functions: Difficult nylon construction
Drilled for lightweight

Specs: Teeth-70
Pitch-32

Needs: Absolutely nothing, this is a direct replacement part.

Comments: This is the very same gear that can be found in the truck set.

2/10/97
AST

Several others have purchased this item along with the item that you are currently checking out.

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch design stimulate gear.

INCLUDES:
One 72 tooth spur gear

REQUIRES:
The other parts of that comprise the slipper clutch are:
    #1994 - tension spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - leading gear shaft to slipper adapter TRAC4185

SPECIFICATIONS:
Tooth: 72
Pitch: 32

This is a wonderful addition to the item currently being discussed.

Slipper Tension Spring

This is the replacement slipper tension spring set for the Traxxas sets that
have slipper clutches (Rad 2, Hawk 2, TRX-1, Blue Eagles).

PACKAGE
INCLUDES:
Slipper tension spring (1)
Stimulate gear bushing (1) -- white
4mm Locknut with nylon insert (1)

Several others have purchased this item along with the item that you are currently checking out.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Long lasting steel construction

INCLUDES:
8 pins

REQUIRES:
Assembly onto T/E-Maxx

SPECIFICATIONS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

REMARKS:
These are enough hinge pins for the entire vehicle.