Traxxas Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS packages that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FUNCTIONS:
Made of RULON

CONSISTS OF:
Twelve pegs ***Colors may vary from photo***

SPECIFICATIONS:
length - 3.5mm
size - 3mm

REMARKS:
These pegs enter the holes on the side of the spur gear.

Regularly acquired with the thing that you are currently reading about.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas packages
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential gear or the spur gear.

PACKAGE
CONSISTS OF: Two notched rings

Regularly acquired with the thing that you are currently reading about.

66T Spur Gear/32P

This package consists of the direct replacement 66tooth 32pitch spur
gear that comes consisted of with the Traxxas Nitro Hawk.

FEATURES:
direct replacement black plastic construction

CONSISTS OF:
1 66tooth 32pitch spur gear

REQUIREMENTS:
2 1/8" size, 3/8" thick

NEEDS:
nothing, this is a replacement part

REMARKS:
the rulon slipper pegs that are installed in the 12 inner
holes of the spur gear are TRAC9685.

AXY
1/10/94

You will certainly love this thing if you have the thing earlier pointed out.

70T Spur Gear 32P

This is the spur gear (or primary gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Tough nylon construction
Drilled for lightweight

Specs: Teeth-70
Pitch-32

Requires: Absolutely nothing, this is a direct replacement part.

Comments: This is the exact same gear that comes in the truck kit.

2/10/97
AST

Many others have acquired this thing in addition to the thing that you are currently reading about.

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch design spur gear.

INCLUDES:
One 72 tooth spur gear

NEEDS:
The other parts of that make up the slipper clutch are:
    #1994 - tension spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - top gear shaft to slipper adapter TRAC4185

SPECIFICATIONS:
Tooth: 72
Pitch: 32

This is a amazing addition to the thing currently being gone over.

Slipper Tension Spring

This is the replacement slipper tension spring set for the Traxxas packages that
have slipper clutches (Rad 2, Hawk 2, TRX-1, Blue Eagles).

PACKAGE
CONSISTS OF:
Slipper tension spring (1)
Stimulate gear bushing (1) -- white
4mm Locknut with nylon insert (1)

Many others have acquired this thing in addition to the thing that you are currently reading about.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Durable steel construction

CONSISTS OF:
Eight pins

NEEDS:
Assembly onto T/E-Maxx

SPECIFICATIONS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

REMARKS:
These suffice hinge pins for the entire car.