Traxxas Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all of the TRAXXAS kits that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, and so on...

FEATURES:
Made from RULON

INCLUDES:
Twelve pegs ***Colors might differ from picture***

SPECIFICATIONS:
length - 3.5mm
diameter - 3mm

REMARKS:
These pegs go in the holes on the side of the spur gear.

Regularly gotten with the thing that you are presently reviewing.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas kits
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential gear or the spur gear.

PACKAGE
INCLUDES: 2 notched rings

Regularly gotten with the thing that you are presently reviewing.

66T Spur Gear/32P

This plan contains the direct replacement 66tooth 32pitch spur
gear that comes included with the Traxxas Nitro Hawk.

FEATURES:
direct replacement black plastic building

INCLUDES:
1 66tooth 32pitch spur gear

SPECS:
2 1/8" diameter, 3/8" thick

REQUIRES:
absolutely nothing, this is a replacement part

REMARKS:
the rulon slipper pegs that are installed in the 12 inner
holes of the spur gear are TRAC9685.

AXY
1/10/94

You will like this product if you have the product previously mentioned.

70T Spur Gear 32P

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Tough nylon building
Drilled for lightweight

Specs: Teeth-70
Pitch-32

Requires: Nothing, this is a direct replacement part.

Comments: This is the exact same gear that is available in the truck package.

2/10/97
AST

Several others have actually gotten this thing in addition to the thing that you are presently reviewing.

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch style spur gear.

INCLUDES:
One 72 tooth spur gear

REQUIRES:
The other parts of that make up the slipper clutch are:
    #1994 - stress spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - leading gear shaft to slipper adapter TRAC4185

SPECIFICATIONS:
Tooth: 72
Pitch: 32

This is a great addition to the thing presently being reviewed.

Slipper Tension Spring

This is the replacement slipper stress spring set for the Traxxas kits that
have slipper clutches (Rad 2, Hawk 2, TRX-1, Blue Eagles).

PLAN
INCLUDES:
Slipper stress spring (1)
Stimulate gear bushing (1) -- white
4mm Locknut with nylon insert (1)

Several others have actually gotten this thing in addition to the thing that you are presently reviewing.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Long lasting steel building

INCLUDES:
Eight pins

REQUIRES:
Assembly onto T/E-Maxx

SPECIFICATIONS:
Length: 65.3mm (2.57")
Size: 3.2mm (.13")

REMARKS:
These are enough hinge pins for the entire car.