Traxxas Slipper Clutch Complete Stampede 4X4

This is the Total Slipper Clutch Set for the Slash 4X4 from Traxxas.

FEATURES:
Total slipper clutch assembly
Pre-assembled

CONSISTS OF:
2 nuts
1 spring
1 metal plate
1 pin
3 pads
2 washers
54T spur gear

NEEDS:
Setup in car

Right here is another product that praises the product being talked about.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building
Steel 10x15x4mm ball bearing with blue rubber seal
Used on slipper shaft

CONSISTS OF:
One aluminum adapter
One 10x15x4mm ball bearing

NEEDS:
Setup on to slipper shaft
Staying clutch pieces

You will like this thing if you have the thing previously mentioned.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Front driveshaft assembly
Screw pin

NEEDS:
Setup on car

This product praises the above talked about product.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Construction
Protected with blue rubber seals

CONSISTS OF:
2 Ball Bearings

NEEDS:
Assembly to car

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

COMMENTS:
These bearings are used to support the Primary Clutch (one required).

Want another excellent product to enhance the above stated product?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Lots of others have acquired this product together with the product that you are currently reading about.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for usage with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Right here is another product that praises the product being talked about.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

This product is often acquired with the above stated product.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Provider/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Provider
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

CONSISTS OF:
One Diff Provider
2 Blue Rubber Shaft Gaskets
One Black Rubber Diff Provider Gaskets
One Gray Washer

NEEDS:
Assembly to car

This is a fantastic enhancement to the product currently being talked about.

Gear Set, Differential

This is the Differential Equipment Set for the Traxxas Revo and E-Maxx.

FEATURES:
Steel building

CONSISTS OF:
2 Output Gears
2 Spider Equipments
Spider Gear Shaft and Diff Provider Assistance
Instruction Sheet

NEEDS:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

This product is often acquired with the above stated product.

Anaconda Tirew/All-Star Bk Chrome Elec Rr 1 Left & 1 Righ

This is a set of the Traxxas Back All Star Wheels
and Anaconda Tires for Electric Vehicles.

FEATURES:
Black chrome plated plastic, 5 spoke design
Split X-Pattern tread tires with foam inserts

CONSISTS OF:
One left and one right all-star wheel with Anaconda tires and
    foam inserts for electric cars

NEEDS:
Installing on car

SPECS:
Diameter: 3.93" (100mm)
Width: 1.96" (50mm)