Traxxas Slipper Clutch, Complete (Incl

    This is the Total Slipper Clutch for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Slipper Clutch Center
One Clutch Pad
One Spring
One 3mm Locking Nut
1.5x6mm Pin

REQUIRES:
Installation on the vehicle

Get this thing to improve the one you read about.



These are the MT Mesh Black Wheels for the Rear 2WD or 4WD Trucks.

FUNCTIONS: Strong nylon building and construction
Black in color
Y-type mesh design
Consists of adapters for lots of types of vehicles

CONSISTS OF: Two MT Mesh black wheels
Two Tamiya/Traxxas adapters
Two Losi truck and buggies adapters
Two Kyosho and Tamiya 4mm axle adapters
Two adapters for older RC10 trucks
Two aluminum washers
Two front wheel adapters for Kyosho, Losi, Associated and Tamiya

REQUIRES: Tires and CA glue

Want an additional great thing to enhance the above stated thing?



These are the Pro-Line Dirt Hawg I 2.2" Buggy (Not Truck) Rear Tires.

FEATURES:
Tread Pattern Comparable to a Full Size Truck
Aggressive Deep Spaced Tread for On and Off-Road Usage
M2 Rubber Compound

CONSISTS OF:
Two Dirt Hawg I 2.2" Back Buggy Tires
Two White Foam Donut Inserts
One Pro-Line Decal

SPECS:
Tire Bead Size: 2.2"
Overall Size: 3-1/2"
Tread Width: 1-3/4"

REQUIRES:
CA Glue and 2.2" Back Buggy Wheels.

COMMENTS:
The writing on the tire states "PRO-LINE, 1701, DIRT HAWG
    and 1.7 x 3.6.
Some posssible wheels:
    PROC1070 1070 Dirt Hawg II 2.2" truck
    PROC1072 1071 Dirt Hawg I 2.2" buggy rear
    PROC1073 1073 Dirt Hawg III 2.2" buggy wide front

This thing compliments the main item right here.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Posts for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

REQUIRES:
Installation on the vehicle

Get this thing to improve the one you read about.

Spur Gear 50T Vxl

This is the optional 50T Spur Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One 50T Spur Gear

REQUIRES:
Installation on the vehicle

SPECS:
Outer Size: 27.4mm (1.1")
Inner Size: 5.5mm (0.22")