Traxxas Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, layered
Anodized black with white springs
Totally assembled

INCLUDES:
4 totally assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the design

The listed below product also sets truly well with the product being gone over.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

REMARKS:
Also readily available in Blue (RPMC0705)

This product compliments the main item right here.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the back of the Traxxas Slash
front and back of the Traxxas Slash 4x4
fornt and back of the HPI Blitz
Nylon building and construction
Red in color
Red bead-locs
*KEEP IN MIND* - Pro-Line does NOT suggest these for usage with brushless
systems

INCLUDES:
Two Rear Split Sixer Wheels

REQUIRES:
Tires

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will enjoy this item if you have the item previously pointed out.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale vehicle applications
Prewired with Traxxas high current adapter

INCLUDES:
7.4V 5000mAh 25C Difficult Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 7.4V
Ranked Capacity: 5000mAh
Release Score: 25C constant
Measurements: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Connector: ElectriFly
Watt Hours: 37Wh

REMARKS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER take apart or modify pack wiring in any method or leak cells
NEVER put on combustible products or leave ignored during
    charging
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g

The listed below product also sets truly well with the product being gone over.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Tough nylon strengthened plastic building and construction
Uses all stock hardware (for installing shocks etc.)

INCLUDES:
One back shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm