Traxxas Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum construction, covered
Anodized black with white springs
Totally put together

INCLUDES:
4 fully put together shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the design

The listed below product also sets actually well with the product being gone over.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

NEEDS:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Density: 0.31" (8mm)

REMARKS:
Also readily available in Blue (RPMC0705)

This product praises the main item here.



These are the Pro-Line Back Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the back of the Traxxas Slash
front and back of the Traxxas Slash 4x4
fornt and back of the HPI Blitz
Nylon construction
Red in color
Red bead-locs
*NOTE* - Pro-Line does NOT suggest these for use with brushless
systems

INCLUDES:
2 Back Split Sixer Wheels

NEEDS:
Tires

SPECS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will enjoy this product if you have the product above discussed.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale vehicle applications
Prewired with Traxxas high current port

INCLUDES:
7.4V 5000mAh 25C Tough Case LiPo Battery with Traxxas Plug

NEEDS:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 7.4V
Ranked Capacity: 5000mAh
Release Rating: 25C constant
Measurements: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Adapter: ElectriFly
Watt Hours: 37Wh

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER take apart or modify pack circuitry in any method or leak cells
NEVER put on flammable products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set charger's output volts to match battery volts
CONSTANTLY stay out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g

The listed below product also sets actually well with the product being gone over.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Durable nylon strengthened plastic construction
Uses all stock hardware (for installing shocks etc.)

INCLUDES:
One back shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm