Traxxas Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum construction, coated
Anodized black with white springs
Entirely put together

CONSISTS OF:
4 fully put together shocks with white springs
Installing hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the design

The listed below thing likewise sets truly well with the thing being reviewed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

NEEDS:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

REMARKS:
Also readily available in Blue (RPMC0705)

This thing praises the main item right here.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the back of the Traxxas Slash
front and back of the Traxxas Slash 4x4
fornt and back of the HPI Blitz
Nylon construction
Red in color
Red bead-locs
*KEEP IN MIND* - Pro-Line does NOT advise these for usage with brushless
systems

CONSISTS OF:
2 Rear Split Sixer Wheels

NEEDS:
Tires

SPECS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will enjoy this product if you have the product earlier mentioned.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale car applications
Prewired with Traxxas high existing adapter

CONSISTS OF:
7.4V 5000mAh 25C Tough Case LiPo Battery with Traxxas Plug

NEEDS:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 7.4V
Ranked Capability: 5000mAh
Discharge Rating: 25C constant
Measurements: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Connector: ElectriFly
Watt Hours: 37Wh

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack electrical wiring in any way or leak cells
NEVER put on flammable products or leave ignored during
    charging
ALWAYS Charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
ALWAYS shut out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g

The listed below thing likewise sets truly well with the thing being reviewed.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Strong nylon enhanced plastic construction
Utilizes all stock hardware (for mounting shocks etc.)

CONSISTS OF:
One back shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm