Traxxas Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, coated
Anodized black with white springs
Completely assembled

CONSISTS OF:
4 totally assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the design

The below item additionally sets truly well with the item being discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

NEEDS:
Installation at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

REMARKS:
Also offered in Blue (RPMC0705)

This item praises the main item here.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the back of the Traxxas Slash
front and back of the Traxxas Slash 4x4
fornt and back of the HPI Blitz
Nylon building
Red in color
Red bead-locs
*KEEP IN MIND* - Pro-Line does NOT advise these for usage with brushless
systems

CONSISTS OF:
Two Rear Split Sixer Wheels

NEEDS:
Tires

SPECIFICATIONS:
Outer Size: 2.2" (56mm)
Inner Size: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will like this product if you have the product earlier mentioned.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/10 scale car applications
Prewired with Traxxas high present connector

CONSISTS OF:
7.4V 5000mAh 25C Tough Case LiPo Battery with Traxxas Plug

NEEDS:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 7.4V
Rated Capability: 5000mAh
Release Rating: 25C continuous
Dimensions: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Port: ElectriFly
Watt Hours: 37Wh

REMARKS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER permit to Release below 2.5V per cell
NEVER dismantle or modify pack electrical wiring in any way or puncture cells
NEVER put on flammable products or leave ignored during
    charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g

The below item additionally sets truly well with the item being discussed.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Tough nylon strengthened plastic building
Uses all stock hardware (for installing shocks and so on)

CONSISTS OF:
One back shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm