Traxxas Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, coated
Anodized black with white springs
Entirely put together

INCLUDES:
4 fully put together shocks with white springs
Installing hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the model

The below product additionally sets truly well with the product being reviewed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

COMMENTS:
Likewise available in Blue (RPMC0705)

This product praises the main item below.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the rear of the Traxxas Slash
front and rear of the Traxxas Slash 4x4
fornt and rear of the HPI Blitz
Nylon building
Red in color
Red bead-locs
*KEEP IN MIND* - Pro-Line does NOT suggest these for usage with brushless
systems

INCLUDES:
2 Rear Split Sixer Wheels

REQUIRES:
Tires

SPECS:
Outer Size: 2.2" (56mm)
Inner Size: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will certainly enjoy this thing if you have the thing just above stated.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/10 scale automobile applications
Prewired with Traxxas high current connector

INCLUDES:
7.4V 5000mAh 25C Tough Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 7.4V
Rated Capacity: 5000mAh
Release Score: 25C continuous
Measurements: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER dismantle or customize pack wiring in any method or puncture cells
NEVER place on combustible materials or leave unattended throughout
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g

The below product additionally sets truly well with the product being reviewed.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Strong nylon reinforced plastic building
Utilizes all stock hardware (for installing shocks etc.)

INCLUDES:
One rear shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm