Traxxas Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, layered
Anodized black with white springs
Entirely put together

INCLUDES:
Four completely put together shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and assembling onto the design

The below item additionally sets actually well with the item being talked about.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

COMMENTS:
Likewise readily available in Blue (RPMC0705)

This item compliments the main item right here.



These are the Pro-Line Back Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the rear of the Traxxas Slash
front and rear of the Traxxas Slash 4x4
fornt and rear of the HPI Blitz
Nylon building and construction
Red in color
Red bead-locs
*NOTE* - Pro-Line does NOT recommend these for usage with brushless
systems

INCLUDES:
2 Back Split Sixer Wheels

REQUIRES:
Tires

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will love this thing if you have the thing earlier stated.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale car applications
Prewired with Traxxas high present connector

INCLUDES:
7.4V 5000mAh 25C Tough Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 7.4V
Rated Capability: 5000mAh
Release Score: 25C continuous
Measurements: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Connector: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER disassemble or customize pack circuitry in any way or puncture cells
NEVER put on flammable materials or leave unattended throughout
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g

The below item additionally sets actually well with the item being talked about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Sturdy nylon strengthened plastic building and construction
Utilizes all stock hardware (for installing shocks and so on)

INCLUDES:
One rear shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm