Traxxas Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, coated
Anodized black with white springs
Totally assembled

INCLUDES:
4 fully assembled shocks with white springs
Installing hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and assembling onto the design

The listed below thing also sets truly well with the thing being talked about.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Thickness: 0.31" (8mm)

REMARKS:
Also readily available in Blue (RPMC0705)

This thing compliments the main item here.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the rear of the Traxxas Slash
front and rear of the Traxxas Slash 4x4
fornt and rear of the HPI Blitz
Nylon building and construction
Red in color
Red bead-locs
*KEEP IN MIND* - Pro-Line does NOT suggest these for usage with brushless
systems

INCLUDES:
2 Rear Split Sixer Wheels

REQUIRES:
Tires

SPECIFICATIONS:
Outer Size: 2.2" (56mm)
Inner Size: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will enjoy this thing if you have the thing just above stated.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/10 scale automobile applications
Prewired with Traxxas high existing port

INCLUDES:
7.4V 5000mAh 25C Difficult Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 7.4V
Ranked Capacity: 5000mAh
Release Rating: 25C continuous
Dimensions: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 37Wh

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER take apart or modify pack circuitry in any way or leak cells
NEVER place on combustible materials or leave ignored throughout
    charging
ALWAYS Charge in a fireproof location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS stay out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g

The listed below thing also sets truly well with the thing being talked about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Sturdy nylon strengthened plastic building and construction
Uses all stock hardware (for mounting shocks etc.)

INCLUDES:
One rear shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm