Traxxas Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum construction, coated
Anodized black with white springs
Completely put together

INCLUDES:
Four completely put together shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and putting together onto the design

The listed below thing also sets truly well with the thing being reviewed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

NEEDS:
Installation at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

COMMENTS:
Likewise readily available in Blue (RPMC0705)

This thing praises the main item here.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the back of the Traxxas Slash
front and back of the Traxxas Slash 4x4
fornt and back of the HPI Blitz
Nylon construction
Red in color
Red bead-locs
*NOTE* - Pro-Line does NOT advise these for usage with brushless
systems

INCLUDES:
2 Rear Split Sixer Wheels

NEEDS:
Tires

SPECIFICATIONS:
Outer Size: 2.2" (56mm)
Inner Size: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will certainly love this product if you have the product just above discussed.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/10 scale vehicle applications
Prewired with Traxxas high existing port

INCLUDES:
7.4V 5000mAh 25C Difficult Case LiPo Battery with Traxxas Plug

NEEDS:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 7.4V
Rated Capability: 5000mAh
Discharge Rating: 25C constant
Dimensions: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Connector: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or customize pack circuitry in any method or puncture cells
NEVER place on combustible products or leave ignored during
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g

The listed below thing also sets truly well with the thing being reviewed.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Strong nylon strengthened plastic construction
Utilizes all stock hardware (for mounting shocks and so on)

INCLUDES:
One back shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm