Traxxas Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, covered
Anodized black with white springs
Totally assembled

INCLUDES:
4 totally assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the model

The below product likewise pairs actually well with the product being talked about.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

REMARKS:
Likewise readily available in Blue (RPMC0705)

This product praises the main item right here.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the rear of the Traxxas Slash
front and rear of the Traxxas Slash 4x4
fornt and rear of the HPI Blitz
Nylon building and construction
Red in color
Red bead-locs
*NOTE* - Pro-Line does NOT recommend these for usage with brushless
systems

INCLUDES:
Two Rear Split Sixer Wheels

REQUIRES:
Tires

SPECS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will like this thing if you have the thing just above stated.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale vehicle applications
Prewired with Traxxas high existing connector

INCLUDES:
7.4V 5000mAh 25C Hard Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 7.4V
Ranked Capacity: 5000mAh
Discharge Score: 25C continuous
Measurements: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Connector: ElectriFly
Watt Hours: 37Wh

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER allow to Discharge listed below 2.5V per cell
NEVER dismantle or modify pack wiring in any way or leak cells
NEVER place on flammable products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g

The below product likewise pairs actually well with the product being talked about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Tough nylon enhanced plastic building and construction
Uses all stock hardware (for mounting shocks and so on)

INCLUDES:
One rear shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm