Traxxas Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, coated
Anodized black with white springs
Completely put together

INCLUDES:
4 completely put together shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and assembling onto the design

The listed below item likewise pairs really well with the item being gone over.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

REMARKS:
Also offered in Blue (RPMC0705)

This item compliments the main item right here.



These are the Pro-Line Back Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the rear of the Traxxas Slash
front and rear of the Traxxas Slash 4x4
fornt and rear of the HPI Blitz
Nylon building and construction
Red in color
Red bead-locs
*KEEP IN MIND* - Pro-Line does NOT suggest these for use with brushless
systems

INCLUDES:
Two Back Split Sixer Wheels

REQUIRES:
Tires

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will certainly enjoy this product if you have the product just above discussed.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/10 scale automobile applications
Prewired with Traxxas high current port

INCLUDES:
7.4V 5000mAh 25C Difficult Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 7.4V
Ranked Capacity: 5000mAh
Discharge Score: 25C continuous
Measurements: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 37Wh

REMARKS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER dismantle or customize pack circuitry in any way or leak cells
NEVER put on combustible products or leave ignored throughout
    charging
ALWAYS Charge in a fireproof location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g

The listed below item likewise pairs really well with the item being gone over.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Durable nylon strengthened plastic building and construction
Utilizes all stock hardware (for installing shocks and so on)

INCLUDES:
One rear shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm