Traxxas Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, coated
Anodized black with white springs
Totally assembled

INCLUDES:
4 completely assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and assembling onto the design

The below product likewise pairs really well with the product being discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

REMARKS:
Likewise readily available in Blue (RPMC0705)

This product praises the main item below.



These are the Pro-Line Back Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the back of the Traxxas Slash
front and back of the Traxxas Slash 4x4
fornt and back of the HPI Blitz
Nylon building and construction
Red in color
Red bead-locs
*KEEP IN MIND* - Pro-Line does NOT suggest these for usage with brushless
systems

INCLUDES:
2 Back Split Sixer Wheels

REQUIRES:
Tires

SPECS:
Outer Size: 2.2" (56mm)
Inner Size: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will like this product if you have the product above stated.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/10 scale car applications
Prewired with Traxxas high current port

INCLUDES:
7.4V 5000mAh 25C Difficult Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 7.4V
Ranked Capability: 5000mAh
Release Rating: 25C constant
Measurements: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 37Wh

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER permit to Release listed below 2.5V per cell
NEVER take apart or modify pack circuitry in any way or leak cells
NEVER put on combustible materials or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g

The below product likewise pairs really well with the product being discussed.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Sturdy nylon reinforced plastic building and construction
Uses all stock hardware (for installing shocks etc.)

INCLUDES:
One back shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm